TEC 2000 Oil BoosterOil Additive

Name: TEC 2000 Oil Booster
Availability: InStock
Rating: 5 (1 reviews)

TEC 2000 Oil Booster is an additive to engine oil that helps reduce its consumption (not combustion). The preparation is also used to maintain appropriate oil pressure, which helps protect engines (especially in older vehicles) against degradation. The preparation slows down the release of acids from used oil and therefore protects the engine against oil acid.

The presented engine oil preparation is based on many mixtures of additives and substances that help keep the engine clean. Due to its properties and effectiveness, it is recommended by the largest car manufacturers in the world. TEC 2000 Oil Booster is an innovative additive that prevents oil from oxidizing and hardening, which in turn translates into lower oil consumption. The use of the preparation also reduces the noise generated by a cold engine by reducing friction when the engine is cold (cold start). The agent is recommended for use in professional car services and at home.

When to use?

when high engine oil consumption occurs
when the friction inside the engine increased
when shavings are visible in the old oil
when you change the oil less frequently than every 12,000 km
when the car only drives in the city
when the engine will be used competitively

How does an oil additive work?

TEC 2000 Oil Booster?

Reduces oil consumption and oil film

Additionally, it lubricates all working engine components

Protects the engine between service inspections

Keeps harmful impurities in the oil mass

Neutralizes harmful acids in the crankcase

Reduces harmful exhaust emissions

Improves fuel economy

Speeds up cold starts

How to use

TEC 2000 Oil BOOSTER

The preparation is dedicated to all petrol and diesel engines.

To fully use the properties of Oil Booster, it is best to use TEC 2000 Engine Flush before adding the preparation

TEC 2000 Oil Booster is added to the oil during routine replacement of the mixture or immediately after its replacement, to fresh oil.

It's good if the engine has already been started. Before adding the additive, the engine should be warmed up to operating temperature.

375ml

FOR EACH FULL 4 LITERS OF ENGINE OIL

Manual

Pour Oil Booster into the engine with the engine turned off
Application is the same as with regular engine oil
Start the engine and let it run at low speed for about 5 minutes.
Attention: If you want to get the best results, choose oils with specifications 5W / 10W / 20W - 50. API "SH" oils or better

TEC 2000 Oil Booster engine oil additive is based on mixtures of oil additives and long-chain polyolefin copolymer. This substance is intended to stabilize the viscosity of the lubricant in the engine.

All engine oil additives included in the preparation help keep the engine clean and reduce its wear.

An agent that reduces friction and oil consumption, fully combines with the oil, increasing the oil film.

All substances found in Oil Booster have been approved by renowned car manufacturers including: BMW, Mercedes Benz, Volkswagen, Mazda, Seat, Ferrari, Nissan, Rover, Peugeot, Rolls Royce, Jaguar, Renault, Fiat, Lancia, Alfa Romeo, Citroen, Toyota.

The substances used in TEC 2000 Oil Booster are the same as in the highest class API (American Petroleum Institute) oils "SJ" and "CD" (for diesel engines).

The properties of the individual substances you will find in Oil Booster meet or exceed the requirements of the European CCMC standard.

TEC 2000 Oil Booster – quality guarantee

Protection of the drive unit is the most important, which is why TEC 2000 Oil Booster is based on additives with the best parameters on the market. This makes it a professional preparation guaranteeing the highest quality of engine protection. TEC 2000 Oil Booster engine oil additive is suitable for both gasoline and diesel engines.

Frequently asked questions

FAQ

Does Oil Booster contain Molybdenum or Teflon?
Can Oil Booster be mixed with ceramic additives?
Can Oil Booster cause wet clutch slippage?