TEC 2000 Fuel Injector Cleaner is an effective product for cleaning injectors in gasoline engines. It is a multifunctional agent often used as a last resort before engine disassembly and injector regeneration. The product is very easy to use and is applied directly to the rail using flexible hoses with a cross-section of approximately 8 mm and a length of around 1.5 meters.
TEC 2000 Fuel Injector Cleaner works extremely effectively, preventing the accumulation of moisture around injectors and contaminants in the cylinders. Moreover, the product also reduces injector wear. For a single use, one 375 ml can of the cleaner is sufficient. The gasoline injector cleaner meets all required quality standards, including EN ISO 9002. The product is suitable for both industrial and home use.
TEC 2000 Fuel Injector Cleaner
TEC 2000 Fuel Injector Cleaner thoroughly cleans injectors and nozzles, improving fuel spray (atomization) as well as the size and shape of the injected fuel. Using the injector cleaner also enhances fuel dosing efficiency.
Regular use of TEC 2000 Fuel Injector Cleaner (at least twice a year) helps reduce or completely eliminate moisture accumulation around injectors. Furthermore, the gasoline injector cleaner ensures cleanliness in the cylinders and prevents partial blockage of injectors. Additionally, it reduces cylinder wear, prevents deposit buildup in the catalytic converter, and eliminates the unpleasant rotten egg smell caused by deposits.
The product can also be used for engines powered by a carburetor.
Below are the results of fuel flow rate tests through a set of partially blocked injectors during the cleaning cycle using TEC 2000 Fuel Injector Cleaner.
Dispenser type: ROVER 216
Minimum flow rate required: 50 ml / 16 seconds @ 2.5 bar (new part spec = 58 ml / 16 seconds @ 2.5 bar)
Injector Start After 2 minutes After 4 minutes After 15 minutes 1 35 ml 48 ml 48 ml 52 ml 2 37 ml 48 ml 48 ml 50 ml 3 45 ml 51 ml 52 ml 54 ml 4 35 ml 43 ml 45 ml 48 ml Total 152 ml 190 ml 192 ml 204 ml
TEC 2000 Fuel Injector Cleaner
The best solution is to apply the product directly to the injector rail using a universal injector cleaning device, which can be easily found on the market.
Such a device typically consists of two hoses with a cross-section of approximately 8 mm and a length of about 1.5 meters.
We recommend installing a fuel filter on the cleaning setup (between the can and the rail).
Injector cleaning ends when the product in the can is exhausted.
Note:
If the injectors in your vehicle are heavily contaminated, we recommend extending the application time (about 40 minutes) using two cans of TEC 2000 Fuel Injector Cleaner (2×375 ml).
375ml
FOR APPROXIMATELY 20 MINUTES OF OPERATION
From this moment, the product begins to work. One can (375 ml) is sufficient for approximately 20 minutes of operation.
Note: After the procedure, we recommend replacing the fuel filter.
for products
Injectors are crucial components of every internal combustion engine. Whether we’re talking about a gasoline or diesel engine, injectors are responsible for fuel dosing......
Jonathan Clarke
Event Coordinator